Direct To Joist: NoMorePly TG4 Flooring system earns KIWA BDA certification
Share
NoMorePly Boarding Systems’ TG4 fibre cement flooring board is now KIWA BDA certified for fixing direct to joists, giving specifiers independent assurance for an A1 rated non-combustible, water-resistant structural deck.
For architectural technologists and specifiers, the question with any alternative to traditional timber decking is rarely “does it work?” but “can I prove it works?”. That is what makes the latest news from NoMorePly Boarding Systems significant. Its 18mm and 22mm TG4 Fibre Cement Flooring Boards with four-sided tongue and groove profiles have achieved KIWA BDA certification for direct-to-joist installation.
Why the certification matters
Kiwa’s BDA Agrément is widely recognised by architects, engineers and building control as confirmation that a product is fit for its intended use, giving specifiers a documented route to compliance rather than reliance on manufacturer claims alone.
Benefits on site and in use
Certified to A1 non-combustible standards which can be easily evidenced and recorded at Gateway 2 and the Golden thread, the TG4 is an obvious choice for replacing timber-based subfloors.
Kelvin Poole, Project Consultant at NoMorePly Boarding System states: “TG4 goes down on the same joists, with the same team, the same way they lay a timber floor. That’s when switching stops being a debate.”
Manufactured to BS EN 12467, UKCA marked and NHBC accepted, the versatile TG4 can be fitted to timber joists, timber I-joists and steel C-section joists with PU adhesive and 50mm fibre cement screws.
- A1 non-combustible, tested to EN ISO 1182 and EN ISO 1716
- Quick to install. Tongue-and-groove profile on all four edges so boards interlock on every side for a tight, load-sharing joint and squeak-free floor.
- Made from Portland cement, cellulose fibres and sand and is available in 18mm and 22mm.
- Fewer cuts and less waste. With tongue and groove on all four edges, cross joints do not need to land on a joist.
- Tile directly to the board. TG4 is a tile backer and floorboard in one, so kitchens and bathrooms do not need a separate backer layer
- Denser floor, sound dampening. TG4 is roughly twice as dense as chipboard flooring. That gives about 23 kg/m² at 18 mm and 28 kg/m² at 22 mm, separating floors with added mass to help reduce airborne sound between flats.
- High performance over wet underfloor heating. Improves efficiency of heat output by up to 50%, compared to plywood or chipboard.
- Moisture resistant and rot-proof. Made for use in wet rooms, the boards stay rot free and can tolerate up to six months’ exposure on site before the building is weathertight.
Who is NoMorePly?
NoMorePly manufactures fibre cement and XPS construction boards as complete, tested systems for walls, floors and roofs, supplied through around 2,000 stockists nationwide and backed by ISO 9001 and ISO 14001 certification. Combining durability, water resistance, fire performance, thermal insulation, and acoustic excellence to help contractors, specifiers, and merchants deliver consistent, compliant results with confidence.
With KIWA BDA certification now behind its direct-to-joist application, the TG4 board offers specifiers something increasingly valuable: a non-combustible, water-resistant floor deck with independent evidence to back it up.
See TG4 and meet the NoMorePly team at London Build stand G130 at ExCeL London, 25–26 November. For technical data, samples or NBS specification, visit nomoreply.co.uk, email sales@nomoreply.co.uk or call 0113 202 2010.

